How to fix a squeaky bed (start by finding where the noise is)
Hi, we’re John and Mimi. A squeak every time you roll over is enough to keep two people awake, and most of the time the fix costs nothing. The trick is finding where the noise really comes from, because the frame, the slats, the legs, the floor, an old box spring and the mattress itself all squeak in different ways. Here’s how we’d track it down, the simple fixes for each spot, and how to tell when the squeak means something needs replacing.
A safety note first: unplug an adjustable base before you reach under or into it, keep fingers clear of hinges and moving parts, and get a second person to help lift a mattress or tip a frame.
The short answer
- Find it first. Take the mattress off and press on the empty frame, then press on the mattress on the floor. Whichever one squeaks alone is your problem.
- Frame squeak? Tighten every bolt and screw with the tool that came with it, and check the brackets and corner joints.
- Slats? Make sure each one sits fully in its holder, and put a strip of felt or fabric where wood rubs on wood.
- Legs or floor? Every leg should touch the floor evenly, including any center support legs; felt or rubber pads under the feet help on hard floors.
- Springs inside the mattress or an old box spring? That usually can’t be tightened away, and it’s one of the signs a bed is wearing out.
Find the squeak before you fix anything
Guessing wastes an afternoon. Try these in order:
- Listen with the bed made. Sit on each corner, then the middle, then roll over the way you do at night. Note where it’s loudest.
- Strip it down. Lift the mattress (and box spring, if you have one) off and lean it against a wall.
- Press on the empty frame. Push down on each rail, each corner and across the slats. A squeak now means frame, slats, legs or floor.
- Test the mattress on its own. Lay it on a clean floor and roll on it. If it still squeaks, the noise is inside the mattress or box spring.
- Check the headboard. A headboard that taps the wall or rubs the frame can sound like a squeak in the bed.
Fixing a squeaky frame: bolts, joints and brackets
- Tighten everything. Bolts and screws loosen a little over months of nightly movement. Go around the whole frame with the hex key or screwdriver from the assembly kit, snug but not stripped.
- Check the corners. Look for a bracket that has slipped or a joint with a gap. Loosen it, line it up, then tighten it again.
- Add a washer. A bolt that keeps backing out can often be quieted with a washer from the hardware store, a common general fix rather than anything specific to one frame.
- Wood rubbing on wood. A thin strip of felt between the two pieces, or a little candle wax or bar soap rubbed on the contact spot, are common household fixes. Don’t put oil or lubricant on upholstered parts, where it can stain the fabric.
- Metal frames. Check the bolts where the side rails meet the headboard brackets and the feet or casters at each corner.
If you’re shopping for a new frame anyway, our how to choose a bed frame guide compares the types in plain English.
Slats that creak or shift
- Seat every slat. A slat that has popped out of its holder or slid toward one side will rub and click. Push each one back into place.
- Cushion the ends. Felt pads or a strip of fabric where the slats rest on the rails stop wood-on-wood noise.
- Mind the gaps. Our mattress listings ask for a continuously solid surface, an adjustable base, or slats no more than 2 inches apart. If your slats are farther apart, the mattress can dip between them; see what to put under a memory foam mattress for the options.
- Replace a cracked slat. A split slat will keep creaking and won’t support the mattress evenly.
Legs, center supports and the floor
- Make every leg touch. One short or loose leg lets the frame rock and squeak. Screw-in legs should all be in the whole way and the same height.
- Center supports. On a queen or larger, center support legs should reach the floor, not hang just above it.
- Pads under the feet. Felt or rubber pads under each leg stop the frame from sliding and ticking on wood, tile or laminate.
- Squeaky floorboards. If the noise stays when you press on the floor next to the bed, it’s the floor. Moving the bed a few inches, or a rug under it, can be the quickest fix.
When the squeak is inside the mattress
If the mattress squeaks on its own on the floor, the noise is coming from its springs. Old-style innerspring mattresses and box springs have steel coils that can creak as they age, and that can’t really be tightened away. Our how long does a mattress last guide lists squeaky springs alongside lumps and sagging edges as signs it may be time to replace it.
- Box spring squeaking? A mattress made for a solid or slatted surface doesn’t need a box spring at all, as long as the slats are close enough (see the slat section above). A foundation with wood slats, like the one in the table below, is another choice.
- All-foam mattresses have no springs inside, so there are no coils to squeak.
- Hybrids use pocketed coils, each wrapped on its own, rather than coils wired together. Noise isn’t something our listings measure, so we won’t promise any mattress is silent.
Sagging along with the squeak? See how to fix a sagging mattress.
An adjustable base that clicks or creaks
Unplug it first. Then raise it and look for a pillow, blanket, cord or toy caught in the frame, check that the base isn’t rubbing a headboard, wall or nightstand, and make sure every leg is screwed in all the way. The full list of checks is in our adjustable bed not working guide. If a motor grinds or the base won’t lift, text John a short video before you take anything apart.
Solid support at today’s prices
If the frame or box spring is past fixing, here’s what we sell to put under a mattress. Prices are read live from our catalog, with free shipping.
| Pick | Best for | Model code | Queen | King |
|---|---|---|---|---|
| Express Foundation | Wood slats on 6" faux wood legs; no tools; can stand alone as the bed | UFG-Q |
$279 | $339 |
| Brooklyn | Upholstered frame, espresso wood legs, slat pack included | SBUBBRO-Q |
Sold out today | $499 |
| Tufted | Gray upholstered frame with tufted headboard, slat pack included | UBHUD-Q |
$649 | Sold out today |
| Avery | Navy camelback headboard, slat pack included | UBAVE-Q |
$629 | Sold out today |
Prices are today’s prices, read live from our catalog, with free FedEx shipping included. “Not offered” means that model isn’t made in that size.
All four upholstered frames list easy assembly and ship in one box, and every frame and the foundation carry a 1-year limited warranty against defects (not misuse or neglect). If a new frame of ours ever squeaks, tighten the hardware first, then text us photos and a short video.
If it’s time for a new mattress too
No springs at all, or wrapped pocketed coils, at today’s prices. Every one ships compressed in a box with free FedEx shipping.
| Pick | Best for | Model code | Queen | King |
|---|---|---|---|---|
| 10" Rose Medium | All foam, medium, gel air memory foam | 10BNV-Q |
$399 | $469 |
| 12" Copper Gel | All foam, medium firm, copper gel memory foam | 12BNCOPPER-Q |
$519 | $659 |
| 10" EcoCore Hybrid Premium | 6" edge-to-edge pocketed coils under soy-based foam | 10HSOY-Q |
$619 | $719 |
Prices are today’s prices, read live from our catalog, with free FedEx shipping included. “Not offered” means that model isn’t made in that size.
Not sure which feel? Try the 60-second mattress quiz or see the mattress comparison chart.
Shop this guide
Support people pick when an old frame or box spring is done.
- Express Mattress Foundation with 6" Grey Wood-Style Legs, from $259. Foundation with wood slats on 6" legs; no tools.
- Tufted Upholstered Bed Frame - UBHUD, from $639. Upholstered frame with a slat pack included.
- 10" EcoCore Hybrid Premium Soy Foam & Pocket Coil Mattress - Medium Firm, from $489. Pocketed coil hybrid, medium firm.
Questions we hear a lot
Why does my bed squeak?
Usually because something has worked loose or is rubbing: bolts and screws in the frame, a slat that has slipped out of its holder, a leg that does not touch the floor, or wood rubbing on wood. Old innerspring mattresses and box springs can also squeak from inside as the coils age. Take the mattress off and press on the empty frame, then on the mattress alone, to find which one it is.
How do I stop my bed frame from squeaking?
Tighten every bolt and screw with the tool from the assembly kit, line up any bracket or corner joint that has shifted, and put felt or a strip of fabric where wood rubs on wood. Make sure every leg, including any center support legs, touches the floor, and add felt or rubber pads under the feet on hard floors.
How do I fix squeaky bed slats?
Push each slat fully back into its holder, cushion the ends where they rest on the rails with felt pads or fabric, and replace any slat that is cracked. Our mattress listings ask for slats no more than 2 inches apart, a continuously solid surface or an adjustable base.
Can a squeaky mattress be fixed?
If the noise comes from springs inside the mattress or an old box spring, it usually cannot be tightened away, and squeaky springs are one of the common signs a mattress is wearing out. All-foam mattresses have no springs inside, and our hybrids use individually wrapped pocketed coils, though our listings do not measure noise.
Why is my adjustable bed squeaking or clicking?
Unplug it, raise it and look for a pillow, blanket, cord or toy caught in the frame, check that it is not rubbing a headboard, wall or nightstand, and make sure every leg is screwed in all the way. If a motor grinds or the base will not lift, text John a short video before taking anything apart.
Send John a video of the squeak
Text John a short video of the noise and a photo of your frame, and he’ll tell you honestly whether it’s a two-minute fix or time for new support. Text or call 818-924-3744, 6 AM to 9 PM Pacific.
Written by John & Mimi Venti, MimiJohn. Frame, foundation and mattress details are from our product listings, checked November 22, 2026. The fixes above are general household tips, not instructions for any one frame; always follow your frame’s own assembly instructions and labels. Prices are read live from our catalog and update automatically.